-
call us
+(359) 878 722 464
bestseller
-
3 BGN Price
Karting Benkovski - voucher for karting
18 BGN Price2024 Sparco K-Pole, Karting Shoes
179 BGN Price2024 Sparco Rush, Karting Gloves
89 BGN Price
-
Speed Denver HS-2, Karting Suit
159 BGN PriceSpeed Melbourne G-2, Karting Gloves
69 BGN PriceSpeed Philadelphia R-1, Karting Suit
119 BGN Regular price 129 BGN PriceSpeed Dresden RK-1, Rib Protector
189 BGN Price
2022 Zamp Z20 Amber, Visor
You can order by phone!
We will help you choose the right gear!
You can pay securely and easily!
Next day delivery for items on stock.
The Zamp Z-20 series shields are designed to fit all Zamp RZ Series helmets. The Zamp Z-20 shields are 3mm thick with tear-off posts. All Z-20 Visors also come with an anti-fog coating.
Please be aware that customers should not place the transparent film (that comes on all standard visors) on top of the Prism Visors. This will not protect the visor and may cause damage to the coating of the visor.
Zamp Z-20 Shield Replacement:
NOTE: It is important to NOT USE power tools or over tighten screws when changing shields.
Step 1 Lay a towel on a flat surface and set the helmet on it.
Step 2 Remove the shield pivot tensioners on each side. This is the smaller screw on the sides of the shield.
Step 3 Remove shield pivot screws on each side. This is the larger screw on the side of the shield. For best results, we suggest using a quarter to loosen/tighten this.
Step 4 Remove shield. We suggest using a cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.
Step 5 Place shield on helmet. There are two white washers that go between shield and helmet, make sure they are in place before re-installing shield.
Step 6 Hand thread in the shield pivots (larger screw) to hold the shield in place. Once hand threaded, use a coin and tighten until they are snug with helmet shell. Do not over
tighten.
Step 7 Hand thread in the shield pivot tensioners, then tighten to desired tension for shield movement.